Aviation Products // Line Maintenance & Exterior Cleaning

Non-flammable phenolic paint stripper
  • Removes epoxy and 2 pack coatings, including primer and base coats
  • Non-corrosive to aluminium, cadmium and high strength steel
  • Slow evaporation rate which allows for extended working life


Callington CH8930 is a thickened non-flammable, neutral phenolic paint stripper for the removal of epoxy, polyurethane and other chemically resistant coatings, including primers and base coats on aircraft surfaces.

Directions for use

• Precaution: CH8930 is damaging to acrylics, most plastics, and composites. Avoid contact to prevent damage.
• Clean any soiled or oily surfaces prior to stripping.
• Mask off all Perspex, plastic and rubber components.
• To avoid unnecessary evaporation, carry out stripping operation away from direct sunlight or wind.
• Apply CH8930 by spray or brush. For spraying, use a Graco barrel pump or equivalent.
• Once paint film has blistered, agitate area with stiff bristle brush if necessary and then rinse off with high pressure water or scrape and rinse off.


• D6-17487
• AMS 1375
• Douglas CSD*1
• USAF MIL-R-81294B
• GPC-R-49

Physical Properties

Density: 1.19 ± 0.01 g/mL
Colour: Light Amber to Brown
Transparency: Translucent to Opaque
Viscosity at 20°C: 65 ± 15 Ps (Spindle #3, 10 rpm)

Ordering Info

6600/51 20L  
6600/64 200L